Successful user operation of a superconducting radio-frequency photoelectron gun with Mg cathodes
J. Teichert, A. Arnold, G. Ciovati, J.-C. Deinert, P. Evtushenko, M. Justus, J. M. Klopf, P. Kneisel, S. Kovalev, M. Kuntzsch, U. Lehnert, P. Lu, S. Ma, P. Murcek, P. Michel, A. Ryzhov, J. Schaber, C. Schneider, R. Schurig, R. Steinbrück, H. Vennekate, I. Will, R. Xiang
DOI 10.1103/PhysRevAccelBeams.24.033401 · Physical Review Accelerators and Beams
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
At the electron linac for beams with high brilliance and low emittance (ELBE) center for high-power radiation sources, the second version of a superconducting radio-frequency (SRF) photoinjector has been put into operation and has been routinely applied for user operation at the ELBE electron accelerator. SRF guns are suitable for generating a continuous wave electron beam with high average currents and high beam brightness. The SRF gun at ELBE has the goal to generate short electron pulses with bunch charges of 200–300 pC at typical repetition rates of 100 kHz for the production of superradiant, coherent terahertz radiation. The SRF gun includes a 3.5-cell, 1.3-GHz niobium cavity and a superconducting solenoid. A support system with liquid nitrogen (LN2) cooling allows the operation of normal-conducting, high quantum efficiency photocathodes. We present the design and performance of the SRF gun as well as beam measurement results of the operation with Mg photocathodes at an acceleration gradient of 8 MV/m (4 MeV kinetic energy). In the last section, we discuss the SRF gun application for production of coherent terahertz radiation at the ELBE facility.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| Nb Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 9.2 | Pressure not reported | unknown |
Similar papers
Characterization of a superconducting Pb photocathode in a superconducting rf photoinjector cavity
similarity 0.95R. Barday et al.
Source status unknown — claims are unverified
Reduction of Dissipative Nonlinear Conductivity of Superconductors by Static and Microwave Magnetic Fields
similarity 0.92A. Gurevich
Source status unknown — claims are unverified
Three-Dimensional Superconducting Resonators at T<20 mK with Photon Lifetimes up to τ=2 s
similarity 0.92A. Romanenko et al.
Source status unknown — claims are unverified
Overview on superconducting photoinjectors
similarity 0.92A. Arnold & J. Teichert
Source status unknown — claims are unverified
Josephson junctions with ferromagnetic barriers for digital superconducting electronics: A review
similarity 0.91A. Mitrovic & M. Bocko
Source status unknown — claims are unverified
Corrugation Flux Front Instability in Type-II Superconductors
similarity 0.91F. Bass et al.
Source status unknown — claims are unverified