Topographic evolution of heat-treated Nb upon electropolishing for superconducting rf applications
Eric M. Lechner, Jonathan W. Angle, Carrie Baxley, Michael J. Kelley, Charles E. Reece
DOI 10.1103/PhysRevAccelBeams.26.103101 · Physical Review Accelerators and Beams
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
Surface finish plays an essential role in the performance of superconducting radio frequency cavities. Several surface treatments have been developed to reduce surface resistance at a moderate accelerating gradient. We investigated the effects of sequential electropolishing on samples vacuum heat-treated at 300 and 600 °C and N-doped Nb samples using atomic force microscopy. The N-doping process precipitates niobium nitrides within grains and, most notably, continuously and deeply along some grain boundaries. Upon electropolishing, the nitrides are preferentially removed leaving behind a topographically imperfect surface marked by relatively deep holes and grooves with low radius of curvature edges. The progression of magnetic field enhancement and superheating field suppression factors upon electropolishing were investigated using atomic force micrographs. While minor changes in magnetic field enhancement and superheating field suppression factors are observed for the 300 and 600 °C heat-treated Nb, substantial improvements are observed for N-doped Nb. In this system, the most severe topographic defects are the grain boundary grooves which substantially suppress the superheating field. We find that the severity of topographic defects is related to the N-doping process.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| Nb Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | — | Pressure not reported | unknown |
Similar papers
Simulation of nonlinear superconducting rf losses derived from characteristic topography of etched and electropolished niobium surfaces
similarity 0.95Chen Xu et al.
Source status unknown — claims are unverified
Plasma processing of large curved surfaces for superconducting rf cavity modification
similarity 0.92J. Upadhyay et al.
Source status unknown — claims are unverified
Influence of crystalline structure on rf dissipation in superconducting niobium
similarity 0.92C. Z. Antoine
Source status unknown — claims are unverified
Surface characterization of nitrogen-doped high purity niobium coupons compared with superconducting rf cavity performance
similarity 0.92Pashupati Dhakal et al.
Source status unknown — claims are unverified
Electrically tunable topological superconductivity and Majorana fermions in two dimensions
similarity 0.91Jing Wang
Source status unknown — claims are unverified
Electron-hole asymmetry and superconductivity
similarity 0.91J. E. Hirsch
Source status unknown — claims are unverified