Magnetic flux penetration and AC loss in a composite superconducting wire with ferromagnetic parts

F. Gömöry; M. Vojenčiak; E. Pardo; J. Šouc

doi:10.1088/0953-2048/22/3/034017

← Back to search

Magnetic flux penetration and AC loss in a composite superconducting wire with ferromagnetic parts

F. Gömöry, M. Vojenčiak, E. Pardo, J. Šouc

arXiv:0808.1790 · DOI 10.1088/0953-2048/22/3/034017 · 2008-08-13 · Superconductor Science and Technology

T3117 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

The current distribution and the AC loss in a composite superconducting tape containing a layer from magnetic material is calculated and compared with experiments, showing a very good agreement. The situations of an alternating uniform applied field or a transport current are studied. The newly developed numerical model is an approximation to the critical state model, adapted for the applicability to commercial finite elements codes that solve the vector potential. Substantial feature of this procedure is that it can be carried out in the case when the critical current density in superconductor depends on the magnetic field and the magnetic layer material is non- linear. Additionally, the hysteresis loss in the magnetic material is estimated, based on its measured magnetization loops. Measurements on Bi-2223 multifilamentary tapes covered on edges by nickel confirmed our predictions, showing a substantial ac loss reduction in both the investigated regimes.

Source-reported materials — not catalogue approval

Formula	Reported Tc (K)	Pressure (GPa)	Type
Bi2Sr2Ca2Cu3O10 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula.	—	Pressure not reported	unknown