Highly crystalline superconducting MgB2 nanowires formed by electrodeposition
Hideki Abe, Akihisa Miyazoe, Keiji Kurashima, Kiyomi Nakajima, Takeshi Aoyagi, Kenji Nishida, Noriyuki Hirota, Takashi Kimura, Yoshimasa Sugimoto, Tsutomu Ando, Hitoshi Wada
arXiv:0906.2025 · 2009-06-10
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
Superconducting nanowires can be synthesised in high-throughput chemical routes and hold great promise as a low-dissipative material for superconducting devices. The applicability of superconducting nanowires, however, has been limited due to the lack of an adequate method to fit the nanowires into given electronic circuits. One of the biggest obstacles is to connect metal terminals to superconducting nanowires in order to establish electric contacts. One attractive method to surmount this difficulty is to synthesise superconducting nanowires directly upon metal terminals such that the nanowires electrically contact the metal surface. Here we demonstrate that this can be achieved by electrodeposition in molten salts. The 39-K superconductor magnesium diboride (MgB2) is electrodeposited to metal surfaces in the form of highly crystalline nanowires. The MgB2 nanowires achieve extensive electric contacts with the metal surfaces. The MgB2 nanowires carry high densities of supercurrents that are comparable to bulk materials. This approach to the electrodeposition of MgB2 nanowires provides a solution to one of the major challenges preventing practical applications of superconducting nanowires.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| MgB2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 39 | Pressure not reported | unknown |
Similar papers
Electroplating of superconducting films of MgB2 from molten salts
similarity 0.89Hideki Abe et al. · 2002 · arXiv:cond-mat/0211310
Source status unknown — claims are unverified
Influence of the Preparation Process on Microstructure, Critical Current Density and Tc of MgB2 Powder-In-Tube Wires
similarity 0.88S. I. Schlachter et al. · 2002 · arXiv:cond-mat/0210591
Source status unknown — claims are unverified
Growth and Properties of Superconducting MgB2 Thin Films
similarity 0.87Michio Naito & Kenji Ueda · 2004 · arXiv:cond-mat/0402333
Source status unknown — claims are unverified
MgB2 superconductor thin films on Si and Al2O3 substrates
similarity 0.87A. Plecenik et al. · 2001 · arXiv:cond-mat/0105612
Source status unknown — claims are unverified
Thin Film Magnesium Boride Superconductor with Very High Critical Current Density and Enhanced Irreversibility Field
similarity 0.87C. B. Eom et al. · 2001 · arXiv:cond-mat/0103425
Source status unknown — claims are unverified
Alignment of Carbon Nanotube Additives for Improved Performance of Magnesium Diboride Superconductors
similarity 0.86Shi Xue Dou et al. · 2006 · arXiv:cond-mat/0602484
Source status unknown — claims are unverified