Losses in coated conductors under non-sinusoidal currents and magnetic fields

G. Furman; M. Spektor; V. Meerovich; V. Sokolovsky

Losses in coated conductors under non-sinusoidal currents and magnetic fields

G. Furman, M. Spektor, V. Meerovich, V. Sokolovsky

arXiv:1005.4819 · 2010-05-26

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

Study of AC losses in superconducting wires and tapes is usually restricted by consideration of applied sinusoidal currents and/or magnetic fields. However, currents in electric power systems contain a wide variety of harmonics. The currents become strongly non-sinusoidal at the operation of converters, non-linear reactors, and during transient and overload conditions. Recently it has been shown that the contribution of higher harmonics to AC losses in superconducting bulk and thin film samples can be tens times larger than in normal-metal samples of the same form and the 5% harmonic can increase the losses by up to 20%. Here we report the results of the analysis of the influence of higher harmonics of the current and magnetic field on AC losses in coated conductors. Analytical expressions are obtained in the framework of the critical state model neglecting response of the normal-metal substrate and stabilization layers. Losses in the superconducting and normal-metal parts of a coated conductor are compared for various designs of the conductor. It is also shown that the 5% third current harmonic can increase the losses in the normal-metal parts by up to 90%. This increase is caused by non-linear response of superconducting layers and should be taken into account at determination of the optimal operation regimes of superconducting devices.