A transformative superconducting magnet technology for fields well above 30 T using isotropic round wire multifilament Bi2Sr2CaCu2O8-x conductor
D. C. Larbalestier, J. Jiang, U. P. Trociewitz, F. Kametani, C. Scheuerlein, M. Dalban-Canassy, M. Matras, P. Chen, N. C. Craig, P. J. Lee, E. E. Hellstrom
arXiv:1305.1269 · 2013-05-06 · arXiv: Superconductivity
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
We report here that magnetic fields of almost 34 T, far above the upper 24 T limit of Nb3Sn, can be generated using a multifilament round wire conductor made of the high temperature cuprate superconductor Bi2Sr2CaCu2O8-x (Bi-2212). A remarkable attribute of this Bi-2212 conductor is that it does not exhibit macroscopic texture and contains many high angle grain boundaries but nevertheless attains very high superconducting critical current densities Jc of 2500 A/mm2 at 20 T and 4.2 K. This Bi-2212 conductor does not possess the extreme texture that high Jc coated conductors of REBa2Cu3O7-x (REBCO) require, avoiding also its high aspect ratio, large superconducting anisotropy and the inherent sensitivity to defects of a single filament conductor. Bi-2212 wires can be wound or cabled into almost any type of superconducting magnet and will be especially valuable for very high field NMR magnets beyond the present 1 GHz proton resonance limit of Nb3Sn technology. This demonstration that grain boundary limits to high Jc can be practically overcome suggests the huge value of a renewed focus on grain boundary properties in non-ideal geometries, especially with the goal of translating the lessons of this Bi-2212 conductor into fabrication of multifilament round wire REBCO or Fe-based superconductors.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| Bi2Sr2CaCu2O8-x Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | — | Pressure not reported | unknown |
Similar papers
Stable, predictable and training-free operation of superconducting Bi-2212 Rutherford cable racetrack coils at the very high wire current density of more than 1000 A/mm2
similarity 0.93Tengming Shen et al. · 2018 · arXiv:1808.02864
Source status unknown — claims are unverified
Three-dimensional electromagnetic modeling of practical superconductors for power applications
similarity 0.87M Kapolka · 2016 · arXiv:1605.09610
Source status unknown — claims are unverified
Critical Current Distributions of Recent Bi-2212 Round Wires
similarity 0.87Shaon Barua et al. · 2021 · arXiv:2102.11460
Source status unknown — claims are unverified
The Conundrum of Strongly Coupled Supercurrent Flow in Both Under- and Over-doped Bi-2212 Round Wires
similarity 0.87Yavuz Oz et al. · 2021 · arXiv:2101.02292
Source status unknown — claims are unverified
Shielding efficiency and E(J) characteristics measured on large melt cast Bi-2212 hollow cylinders in axial magnetic fields
similarity 0.85J-F Fagnard et al. · 2010 · arXiv:1007.4628
Source status unknown — claims are unverified
Time reversal invariant single-gap superconductivity with upper critical field larger than the Pauli limit in NbIr2B2
similarity 0.85Debarchan Das et al.
Source status unknown — claims are unverified