Design and Comparison of a 1 MW / 5s HTS SMES with Toroidal and Solenoidal Geometry
Antonio Morandi, Massimo Fabbri, Babak Gholizad, Francesco Grilli, Frédéric Sirois, Víctor M. R. Zermeño
arXiv:1511.00807 · DOI 10.1109/TASC.2016.2535271 · 2015-11-03 · IEEE Transactions on Applied Superconductivity
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
The design of a HTS SMES coil with solenoidal and toroidal geometry is carried out based on a commercially available 2G HTS conductor. A SMES system of practical interest (1 MW / 5 s) is considered. The comparison between ideal toroidal and solenoidal geometry is first discussed and the criteria used for choosing the geometrical parameters of the coils' bore are explained. The design of the real coil is then carried out and the final amount of conductor needed is compared. A preliminary comparison of the two coils in terms of AC loss during one charge discharge cycle is also discussed.
Similar papers
Review of the AC Loss Computation for HTS using the H-formulation
similarity 0.86Boyang Shen et al. · 2019 · arXiv:1908.02176
Source status unknown — claims are unverified
T-A Formulation to Model Electrical Machines with HTS Coated Conductor Coils
similarity 0.83Tara Benkel et al. · 2019 · arXiv:1901.02370
Source status unknown — claims are unverified
3D homogenization of the T-A formulation for the analysis of coils with complex geometries
similarity 0.82Carlos Roberto Vargas-Llanos et al. · 2022 · arXiv:2206.09718
Source status unknown — claims are unverified
First tests of a 800 kJ HTS SMES
similarity 0.82Pascal Tixador et al. · 2008 · arXiv:0812.3639
Source status unknown — claims are unverified
DC and AC Characterization of Pancake Coils Made from Roebel-Assembled Coated Conductor Cable
similarity 0.82Anna Kario et al. · 2014 · arXiv:1408.0616
Source status unknown — claims are unverified
Influence of Coil Position on AC Losses of Stator Superconducting Windings of a Synchronous Machine for a 10 MW Wind Turbine
similarity 0.82Carlos Roberto Vargas-Llanos et al. · 2021 · arXiv:2102.12278
Source status unknown — claims are unverified