AC bias characterization of low noise bolometers for SAFARI using an Open-Loop Frequency Domain SQUID-based multiplexer operating between 1 and 5 MHz

Luciano Gottardi; Marcel Bruijn; Jan-R. Gao; Roland den Hartog; Richard Hijmering; Henk Hoevers; Pourya Khosropanah; Piet de Korte; Jan van der Kuur; Mark Lindeman; Marcel Ridder

doi:10.1007/s10909-012-0559-x

AC bias characterization of low noise bolometers for SAFARI using an Open-Loop Frequency Domain SQUID-based multiplexer operating between 1 and 5 MHz

Luciano Gottardi, Marcel Bruijn, Jan-R. Gao, Roland den Hartog, Richard Hijmering, Henk Hoevers, Pourya Khosropanah, Piet de Korte, Jan van der Kuur, Mark Lindeman, Marcel Ridder

arXiv:1604.02593 · DOI 10.1007/s10909-012-0559-x · 2016-04-09 · Journal of Low Temperature Physics

T37 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

SRON is developing the Frequency Domain Multiplexing (FDM) readout and the ultra low NEP TES bolometers array for the infrared spectrometer SAFARI on board of the Japanese space mission SPICA. The FDM prototype of the instrument requires critical and complex optimizations. For single pixel characterization under AC bias we are developing a simple FDM system working in the frequency range from 1 to 5 MHz, based on the open loop read-out of a linearized two-stage SQUID amplifier and high Q lithographic LC resonators. We describe the details of the experimental set-up required to achieve low power loading (< 1 fW) and low noise (NEP $\sim 10^{-19} W/Hz^{1/2}$) in the TES bolometers. We conclude the paper by comparing the performance of a $4 \cdot 10^{-19} W/Hz^{1/2}$ TES bolometer measured under DC and AC bias.