NbN/AlN/NbN Josephson junctions on sapphire for receiver applications

M. Merker; C. Bohn; M. Völlinger; K. Ilin; M. Siegel

doi:10.1109/TASC.2016.2631841

← Back to search

NbN/AlN/NbN Josephson junctions on sapphire for receiver applications

M. Merker, C. Bohn, M. Völlinger, K. Ilin, M. Siegel

arXiv:1612.02713 · DOI 10.1109/TASC.2016.2631841 · 2016-12-08 · IEEE Transactions on Applied Superconductivity

T1theoretical2 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

The most developed integrated receivers for THz radiation nowadays are based on Josephson junction SIS devices. In this kind of devices, the highest receivable frequency is determined by the energy gap of the superconducting electrodes and limited to approximately 700 GHz in case of Nb/AlOx/Nb multilayers. We have developed a technology for NbN/AlN/NbN Josephson junctions on sapphire substrates which allow operation at frequencies above 1 THz. The trilayers are deposited in-situ in a 3-chamber DC-magnetron sputtering system at temperatures as high as 775 °C. Each layer is reactively sputtered in an argon and nitrogen atmosphere. By variation of the partial gas pressures and discharge current of the plasma, optimum deposition conditions for the tri-layers were found. So far, gap voltages as high as 5.1 mV at 4.2 K have been achieved which allows the operation frequency of the JJ devices to exceed 1 THz.

Source-reported materials — not catalogue approval

Formula	Reported Tc (K)	Pressure (GPa)	Type
NbN Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula.	—	Pressure not reported	—