Superconducting boron doped nanocrystalline diamond microwave coplanar resonator

Jerome A. Cuenca; Thomas Brien; Soumen Mandal; Scott Manifold; Simon Doyle; Adrian Porch; Georgina M. Klemencic; Oliver A. Williams

doi:10.1016/j.carbon.2022.08.084

Superconducting boron doped nanocrystalline diamond microwave coplanar resonator

Jerome A. Cuenca, Thomas Brien, Soumen Mandal, Scott Manifold, Simon Doyle, Adrian Porch, Georgina M. Klemencic, Oliver A. Williams

arXiv:2202.13397 · DOI 10.1016/j.carbon.2022.08.084 · 2022-02-27 · Carbon

T38 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

A superconducting boron doped nanocrystalline diamond (B-NCD) coplanar waveguide resonator (CPR) is presented for kinetic inductance ($L_k$) and penetration depth ($λ_{\rm{L}}$) measurements at microwave frequencies of 0.4 to 1.2 GHz and at temperatures below 3 K. Using a simplified effective medium CPR approach, this work demonstrates that thin granular B-NCD films ($t\approx $ 500 nm) on Si have a large penetration depth ($λ_{\rm{L}}\approx 4.3$ to 4.4 $μ$m), and therefore an associated high kinetic inductance ($L_{k,\square} \approx $ 670 to 690 pH/$\square$). These values are much larger than those typically obtained for films on single crystal diamond which is likely due to the significant granularity of the nanocrystalline films. Based on the measured Q factors of the structure, the calculated surface resistance in this frequency range is found to be as low as $\approx$ 2 to 4 $μΩ$ at $T<2$ K, demonstrating the potential for granular B-NCD for high quality factor superconducting microwave resonators and highly sensitive kinetic inductance detectors.