← Back to search

Response of a Cold-Electron Bolometer in a coplanar antenna system

D. A. Pimanov, A. L. Pankratov, A. V. Gordeeva, A. V. Chiginev, A. V. Blagodatkin, L. S. Revin, S. A. Razov, V. Yu. Safonova, I. A. Fedotov, E. V. Skorokhodov, A. N. Orlova, D. A. Tatarsky, N. S. Gusev, I. V. Trofimov, A. M. Mumlyakov, M. A. Tarkhov

arXiv:2412.07364 · DOI 10.1088/1361-6668/adb942 · 2024-12-10 · Superconductor Science and Technology

T1experimental1 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

Cold electron bolometers have shown their suitability for use in modern fundamental physical experiments. Fabrication and measurements of the samples with cold-electron bolometers integrated into coplanar antennas are performed in this study. The bolometric layer was made using combined aluminum-hafnium technology to improve quality of aluminum oxide layer and decrease the leakage current. The samples of two types were measured in a dilution cryostat at various temperatures from 20 to 300 mK. The first sample with Ti/Au/Pd antenna shows response in the two frequency bands, at 7--9 GHz with bandwidth of about 20%, and also at 14 GHz with 10% bandwidth. The NEP below 10 aW/Hz^1/2 is reached at 300 mK for 7.7 GHz signal. The second sample with aluminum made antenna shows response in the frequency range 0.5--3 GHz due to the effect of kinetic inductance of superconducting aluminum.

Source-reported materials — not catalogue approval

FormulaReported Tc (K)Pressure (GPa)Type
Al

Archive — visibility unverified

Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula.

—Pressure not reportedunknown

Similar papers