Performance analysis of the European X-ray Free Electron Laser 3.9 GHz superconducting cavities
M. Bertucci, A. Bignami, A. Bosotti, P. Michelato, L. Monaco, C. Pagani, R. Paparella, D. Sertore, C. Maiano, P. Pierini, J. Chen
DOI 10.1103/PhysRevAccelBeams.22.082002 · Physical Review Accelerators and Beams
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
The limits of performance of the European XFEL 3.9 GHz superconducting cavities were investigated. Most cavities exhibited high field Q slope, reaching the breakdown field at approximately 22 MV/m. We hypothesize that this limit is a feature of high frequency cavities and can be explained by a thermal model incorporating field dependent surface resistance. The results obtained from simulations were in good agreement with experimental data obtained at 2 K.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| Nb Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 9.25 | Pressure not reported | unknown |
Similar papers
Development of superconducting crossbar-H-mode cavities for proton and ion accelerators
similarity 0.96F. Dziuba et al.
Source status unknown — claims are unverified
Thermal feedback in coaxial superconducting radio frequency cavities
similarity 0.95Mattias McMullin et al.
Source status unknown — claims are unverified
High-energy ion linacs based on superconducting spoke cavities
similarity 0.95K. W. Shepard et al.
Source status unknown — claims are unverified
First experience with He conditioning of a superconducting rf photoinjector
similarity 0.94I. Petrushina et al.
Source status unknown — claims are unverified
Operation of the 56 MHz superconducting rf cavity in RHIC with higher order mode damper
similarity 0.94Qiong Wu et al.
Source status unknown — claims are unverified
Optimizing the configuration of a superconducting photonic band gap accelerator cavity to increase the maximum achievable gradients
similarity 0.94Evgenya I. Simakov et al.
Source status unknown — claims are unverified