Plasma treatment of bulk niobium surface for superconducting rf cavities: Optimization of the experimental conditions on flat samples
M. Rašković, J. Upadhyay, L. Vušković, S. Popović, A-M. Valente-Feliciano, L. Phillips
DOI 10.1103/PhysRevSTAB.13.112001 · Physical Review Special Topics - Accelerators and Beams
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
Accelerator performance, in particular the average accelerating field and the cavity quality factor, depends on the physical and chemical characteristics of the superconducting radio-frequency (SRF) cavity surface. Plasma based surface modification provides an excellent opportunity to eliminate nonsuperconductive pollutants in the penetration depth region and to remove the mechanically damaged surface layer, which improves the surface roughness. Here we show that the plasma treatment of bulk niobium (Nb) presents an alternative surface preparation method to the commonly used buffered chemical polishing and electropolishing methods. We have optimized the experimental conditions in the microwave glow discharge system and their influence on the Nb removal rate on flat samples. We have achieved an etching rate of 1.7 μm/min using only 3% chlorine in the reactive mixture. Combining a fast etching step with a moderate one, we have improved the surface roughness without exposing the sample surface to the environment. We intend to apply the optimized experimental conditions to the preparation of single cell cavities, pursuing the improvement of their rf performance.
Similar papers
Plasma processing of large curved surfaces for superconducting rf cavity modification
similarity 0.95J. Upadhyay et al.
Source status unknown — claims are unverified
Laser polishing of niobium for superconducting radio-frequency accelerator applications
similarity 0.91Liang Zhao et al.
Source status unknown — claims are unverified
Surface characterization of nitrogen-doped high purity niobium coupons compared with superconducting rf cavity performance
similarity 0.90Pashupati Dhakal et al.
Source status unknown — claims are unverified
Improvement and protection of niobium surface superconductivity by Atomic Layer Deposition and heat treatment
similarity 0.89T. Proslier et al. · 2008 · arXiv:0808.3427
Source status unknown — claims are unverified
Topographic evolution of heat-treated Nb upon electropolishing for superconducting rf applications
similarity 0.89Eric M. Lechner et al.
Source status unknown — claims are unverified
Vertical electropolishing for 1.3 GHz single- and nine-cell superconducting niobium cavities: A parametric optimization and rf performance
similarity 0.89Vijay Chouhan et al.
Source status unknown — claims are unverified