Effect of mild baking on superconducting niobium cavities investigated by sequential nanoremoval
A. Romanenko, A. Grassellino, F. Barkov, J. P. Ozelis
DOI 10.1103/PhysRevSTAB.16.012001 · Physical Review Special Topics - Accelerators and Beams
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
The near-surface nanostructure of niobium determines the performance of superconducting microwave cavities. Subtle variations in surface nanostructure lead to yet unexplained phenomena such as the dependence of the quality factor of these resonating structures on the magnitude of rf fields—an effect known as the “Q slopes”. Understanding and controlling the Q slopes is of great practical importance for particle accelerators. Here we investigate the mild baking effect—120°C vacuum baking for 48 hours—which strongly affects the Q slopes. We used a hydrofluoric acid rinse alternating with oxidation in water as a tool for stepwise material removal of about 2 nanometers/step from the surface of superconducting niobium cavities. Applying removal cycles on mild baked cavities and measuring the quality factor dependence on the rf fields after one or several such cycles allowed us to explore the distribution of lossy layers within the first several tens of nanometers from the surface. We found that a single HF rinse results in the increase of the cavity quality factor. The low field Q slope was shown to be mostly controlled by the material structure within the first six nanometers from the surface. The medium field Q slope evolution was fitted using linear (∝B peak surface magnetic field) and quadratic (∝B2) terms in the surface resistance and it was found that best fits do not require the quadratic term. We found that about 10 nanometers of material removal are required to bring back the high field Q slope and about 20–50 nanometers to restore the onset field to the prebaking value.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| Nb Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 9.25 | Pressure not reported | unknown |
Similar papers
Laser polishing of niobium for superconducting radio-frequency accelerator applications
similarity 0.95Liang Zhao et al.
Source status unknown — claims are unverified
Vertical electropolishing for 1.3 GHz single- and nine-cell superconducting niobium cavities: A parametric optimization and rf performance
similarity 0.95Vijay Chouhan et al.
Source status unknown — claims are unverified
Localization and Mitigation of Loss in Niobium Superconducting Circuits
similarity 0.95M. Virginia P. Altoé et al.
Source status unknown — claims are unverified
Effect of low temperature baking in nitrogen on the performance of a niobium superconducting radio frequency cavity
similarity 0.94Pashupati Dhakal et al.
Source status unknown — claims are unverified
Vacancy dynamics in niobium and its native oxides and their potential implications for quantum computing and superconducting accelerators
similarity 0.94Marc Wenskat et al.
Source status unknown — claims are unverified
Search for Superscreening Effects in a Superconductor
similarity 0.94P. Ujić et al.
Source status unknown — claims are unverified