Effective Ex-Situ Fabrication of F-Doped SmFeAsO Wire for High Transport Critical Current Density
Masaya Fujioka, Tomohiro Kota, Masanori Matoba, Toshinori Ozaki, Yoshihiko Takano, Hiroaki Kumakura, Yoichi Kamihara
arXiv:1105.3342 · DOI 10.1143/APEX.4.063102 · 2011-05-17 · Applied Physics Express
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
We demonstrate the fabrication of superconducting SmFeAsO1-xFx (Sm-1111) wires by using the ex-situ powder-in-tube technique. Sm-1111 powder and a binder composed of SmF3, samarium arsenide, and iron arsenide were used to synthesize the superconducting core. Although the F content of Sm-1111 is reduced in the process of ex-situ fabrication, the binder compensates by sufficiently supplementing the F content, thereby preventing a decrease in the superconducting transition temperature and a shrinkage of the superconducting volume fraction. Thus, in the superconducting Sm-1111 wire with the binder, the transport critical current density reaches the highest value of ~4 kA/cm2 at 4.2 K.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| SmFeAsO1-xFx Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | — | Pressure not reported | — |
Similar papers
Analysis of interdiffusion between SmFeAsO0.92F0.08 and metals for ex situ fabrication of superconducting wire
similarity 0.98Masaya Fujioka et al. · 2011 · arXiv:1106.1328
Source status unknown — claims are unverified
Enhancement of transport critical current density of SmFeAsO1-xFx tapes fabricated by an ex-situ powder-in-tube method with a Sn-presintering process
similarity 0.92Qianjun Zhang et al. · 2014 · arXiv:1405.6835
Source status unknown — claims are unverified
Development of Powder-in-Tube Processed Iron Pnictide Wires and Tapes
similarity 0.89Yanwei Ma et al. · 2010 · arXiv:1008.1735
Source status unknown — claims are unverified
High critical current density and low anisotropy in textured Sr1-xKxFe2As2 tapes for high field applications
similarity 0.89Zhaoshun Gao et al. · 2013 · arXiv:1302.4583
Source status unknown — claims are unverified
Fabrication and characterization of iron pnictide wires and bulk materials through the powder-in-tube method
similarity 0.88Yanwei Ma et al. · 2009 · arXiv:0906.3114
Source status unknown — claims are unverified
Fabrication of the iron-based superconducting wire using Fe(Se, Te)
similarity 0.88Yoshikazu Mizuguchi et al. · 2009 · arXiv:0906.1636
Source status unknown — claims are unverified