A dispersive nanoSQUID magnetometer for ultra-low noise, high bandwidth flux detection

E. M. Levenson-Falk; R. Vijay; N. Antler; I. Siddiqi

doi:10.1088/0953-2048/26/5/055015

← Back to search

A dispersive nanoSQUID magnetometer for ultra-low noise, high bandwidth flux detection

E. M. Levenson-Falk, R. Vijay, N. Antler, I. Siddiqi

arXiv:1301.3184 · DOI 10.1088/0953-2048/26/5/055015 · 2013-01-14 · Superconductor Science and Technology

T337 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

We describe a dispersive nanoSQUID magnetometer comprised of two variable thickness aluminum weak-link Josephson junctions shunted in parallel with an on-chip capacitor. This arrangement forms a nonlinear oscillator with a tunable 4-8 GHz resonant frequency with a quality factor Q = 30 when coupled directly to a 50 $Ω$ transmission line. In the presence of a near-resonant microwave carrier signal, a low frequency flux input generates sidebands that are readily detected using microwave reflectometry. If the carrier excitation is sufficiently strong then the magnetometer also exhibits parametric gain, resulting in a minimum effective flux noise of 30 n$Φ_0$/Hz$^{1/2}$ with 20 MHz of instantaneous bandwidth. If the magnetometer is followed with a near quantum-noise-limited Josephson parametric amplifier, we can increase the bandwidth to 60 MHz without compromising sensitivity. This combination of high sensitivity and wide bandwidth with no on-chip dissipation makes this device ideal for local sensing of spin dynamics, both classical and quantum.