An ultra-sensitive and wideband magnetometer based on a superconducting quantum interference device

Jan-Hendrik Storm; Peter Hömmen; Dietmar Drung; Rainer Körber

doi:10.1063/1.4976823

← Back to search

An ultra-sensitive and wideband magnetometer based on a superconducting quantum interference device

Jan-Hendrik Storm, Peter Hömmen, Dietmar Drung, Rainer Körber

arXiv:1702.05428 · DOI 10.1063/1.4976823 · 2017-02-17 · Applied Physics Letters

T391 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

The magnetic field noise in superconducting quantum interference devices (SQUIDs) used for biomagnetic research such as magnetoencephalography or ultra-low-field nuclear magnetic resonance is usually limited by instrumental dewar noise. We constructed a wideband, ultra-low noise system with a 45 mm diameter superconducting pick-up coil inductively coupled to a current sensor SQUID. Thermal noise in the liquid helium dewar is minimized by using aluminized polyester fabric as superinsulation and aluminum oxide strips as heat shields, respectively. With a magnetometer pick-up coil in the center of the Berlin magneti- cally shielded room 2 (BMSR2) a noise level of around 150 aT Hz$^{-1/2}$ is achieved in the white noise regime between about 20 kHz and the system bandwidth of about 2.5 MHz. At lower frequencies, the resolution is limited by magnetic field noise arising from the walls of the shielded room. Modeling the BMSR2 as a closed cube with continuous μ-metal walls we can quantitatively reproduce its measured field noise.