Reduction of gas bubbles and improved critical current density in Bi-2212 round wire by swaging
Jianyi Jiang, Hanping Miao, Yibing Huang, Seung Hong, Jeff A. Parrell, Christian Scheuerlein, Marco Di Michiel, Arup K. Ghosh, Ulf P. Trociewitz, Eric E. Hellstrom, David C. Larbalestier
arXiv:1301.3401 · DOI 10.1109/TASC.2013.2237873 · 2013-01-15 · IEEE Transactions on Applied Superconductivity
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
Bi-2212 round wire is made by the powder-in-tube technique. An unavoidable property of powder-in-tube conductors is that there is about 30% void space in the as-drawn wire. We have recently shown that the gas present in the as-drawn Bi-2212 wire agglomerates into large bubbles and that they are presently the most deleterious current limiting mechanism. By densifying short 2212 wires before reaction through cold isostatic pressing (CIPping), the void space was almost removed and the gas bubble density was reduced significantly, resulting in a doubled engineering critical current density (JE) of 810 A/mm2 at 5 T, 4.2 K. Here we report on densifying Bi-2212 wire by swaging, which increased JE (4.2 K, 5 T) from 486 A/mm2 for as-drawn wire to 808 A/mm2 for swaged wire. This result further confirms that enhancing the filament packing density is of great importance for making major JE improvement in this round-wire magnet conductor.
Similar papers
Role of internal gases and creep of Ag in controlling the critical current density of Ag-sheathed Bi2Sr2CaCu2Ox wires
similarity 0.90T. Shen et al. · 2013 · arXiv:1301.5341
Source status unknown — claims are unverified
Hot isostatic pressing of powder in tube MgB2 wires
similarity 0.86A. Serquis et al. · 2003 · arXiv:cond-mat/0303043
Source status unknown — claims are unverified
Critical Current Distributions of Recent Bi-2212 Round Wires
similarity 0.85Shaon Barua et al. · 2021 · arXiv:2102.11460
Source status unknown — claims are unverified
Enhancement of critical current density in (Ba,Na)Fe2As2 round wires using high-pressure sintering
similarity 0.85Sunseng Pyon et al. · 2020 · arXiv:2004.10423
Source status unknown — claims are unverified
The Conundrum of Strongly Coupled Supercurrent Flow in Both Under- and Over-doped Bi-2212 Round Wires
similarity 0.84Yavuz Oz et al. · 2021 · arXiv:2101.02292
Source status unknown — claims are unverified