Examination of the tradeoff between intrinsic and extrinsic properties in the optimization of a modern internal tin Nb3Sn conductor
C. Tarantini, P. J. Lee, N. Craig, A. Ghosh, D. C. Larbalestier
arXiv:1310.6729 · DOI 10.1088/0953-2048/27/6/065013 · 2013-10-24 · Superconductor Science and Technology
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
In modern Nb3Sn wires there is a fundamental compromise to be made between optimizing the intrinsic properties associated with the superfluid density in the A15 phase (e.g. Tc, Hc, Hc2, all of which are composition dependent), maximizing the quantity of A15 that can be formed from a given mixture of Nb, Sn and Cu, minimizing the A15 composition gradients within each sub-element, while at the same time generating a high vortex pinning critical current density, Jc, by maximizing the grain boundary density with the additional constraint of maintaining the RRR of the Cu stabilizer above 100. Here we study these factors in a Ta-alloyed Restacked-Rod-Process (RRP) wire with ~70 microns diameter sub-elements. Consistent with many earlier studies, maximum non-Cu Jc(12T,4.2K) requires preventing A15 grain growth, rather than by optimizing the superfluid density. In wires optimized for 12T, 4.2K performance, about 60% of the non-Cu cross-section is A15, 35% residual Cu and Sn core, and only 5% a residual Nb7.5wt.%Ta diffusion barrier. The specific heat and chemical analyses show that in this 60% A15 fraction there is a wide range of Tc and chemical composition that does diminish for higher heat treatment temperatures, which, however, are impractical because of the strong RRR degradation that occurs when only about 2% of the A15 reaction front breaches the diffusion barrier. As this kind of Nb3Sn conductor design is being developed for sub-elements 1/2 the present size, it is clear that better barriers are essential to allowing higher temperature reactions with better intrinsic A15 properties. We present here multiple and detailed intrinsic and extrinsic evaluations because we believe that only such broad and quantitative descriptions are capable of accurately tracking the limitations of individual conductor designs where optimization will always be a compromise between inherently conflicting goals
Similar papers
Simulations of the effects of tin composition gradients on the superconducting properties of Nb3Sn conductors
similarity 0.89L. D. Cooley et al. · 2004 · arXiv:cond-mat/0402206
Source status unknown — claims are unverified
Critical current densities and microstructures in Rod-in-Tube and Tube Type Nb3Sn strands - Present status and prospects for improvement
similarity 0.88X Xu et al. · 2013 · arXiv:1304.6025
Source status unknown — claims are unverified
The upper critical field of filamentary Nb3Sn conductors
similarity 0.86A. Godeke et al. · 2004 · arXiv:cond-mat/0410463
Source status unknown — claims are unverified
Evidence from EXAFS for Different Ta/Ti Site Occupancy in High Critical Current Density NbSn Superconductor Wires
similarity 0.86Steve M. Heald et al. · 2018 · arXiv:1803.07025
Source status unknown — claims are unverified
Significant enhancement of compositional and superconducting homogeneity in Ti rather than Ta-doped Nb3Sn
similarity 0.86C. Tarantini et al. · 2015 · arXiv:1510.07590
Source status unknown — claims are unverified
A Review of the Properties of Nb3Sn and Their Variation with A15 Composition, Morphology and Strain State
similarity 0.86A. Godeke · 2006 · arXiv:cond-mat/0606303
Source status unknown — claims are unverified