← Back to search

Refinement of Nb3Sn grain size by the generation of ZrO2 precipitates in Nb3Sn wires

X. Xu, M. Sumption, X. Peng, E. W. Collings

arXiv:1402.3001 · DOI 10.1063/1.4866865 · 2014-02-12 · Applied Physics Letters

T368 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

In this letter we demonstrate that if oxygen can be properly supplied to (Nb-Zr)-Sn wires, ZrO2 precipitates will form during the heat treatment, refining the Nb3Sn grain size markedly. Here, a Nb3Sn subelement was fabricated in which Nb-1Zr alloy was used, and oxygen was supplied via SnO2 powder. The results showed that such a design could supply sufficient oxygen to internally oxidize the Zr in the Nb-1Zr alloy, and that the sample reacted at 650 °C had grain sizes of ~45 nm, less than half the size of the grains in present Nb3Sn conductors. Magnetic measurements showed that the peak of the pinning force vs. field (Fp-B) curve was shifted to ~0.3Birr (the irreversibility field).

Similar papers