Fabrication and Transport Properties of 100 m Class Sr0.6K0.4Fe2As2 Wires and Pancake Coils

Xianping Zhang; Hidetoshi Oguro; Chao Yao; Chiheng Dong; Zhongtang Xu; Dongliang Wang; Satoshi Awaji; Kazuo Watanabe; Yanwei Ma

doi:10.1109/TASC.2017.2650408

Fabrication and Transport Properties of 100 m Class Sr0.6K0.4Fe2As2 Wires and Pancake Coils

Xianping Zhang, Hidetoshi Oguro, Chao Yao, Chiheng Dong, Zhongtang Xu, Dongliang Wang, Satoshi Awaji, Kazuo Watanabe, Yanwei Ma

arXiv:1609.08301 · DOI 10.1109/TASC.2017.2650408 · 2016-09-27 · IEEE Transactions on Applied Superconductivity

T349 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

Iron-pnictides are hotly studied since 2008 in the superconducting materials research area, due to their special properties and unclear mechanism. Big achievement has been made in the pnictide research during the past years. For practical uses, pnictide superconductor should be fabricated in a long wire form which can be used for different devices. In this work, 100 m class 7-core Sr0.6K0.4Fe2As2 (Sr122) tapes have been made using the powder-in-tube technique, which is reported for the first time. Clearly, an average Jc of 1.3x10^4 A/cm^2 at 10 T was reached over the 115 meter length, showing a high property and good uniformity of 100 meter level Sr122 tapes. Using the 10 m long Sr122 tapes, two double-pancake coils were fabricated by a wind and reaction technique. No transport current could be measured for the coil made from the mono-filamentary tape. However, transport Ic was obtained in the coil made from the 7-filamentary tape. The factors which affect the superconducting property of the coil were discussed in this work.