Fabrication of small superconducting coils using (Ba,A)Fe2As2 (A: Na, K) round wires with large critical current densities
Sunseng Pyon, Haruto Mori, Tsuyoshi Tamegai, Satoshi Awaji, Hijiri Kito, Shigeyuki Ishida, Yoshiyuki Yoshida, Hideki Kajitani, Norikiyo Koizumi
arXiv:2106.10612 · DOI 10.1088/1361-6668/ac0cca · 2021-06-20 · Superconductor Science and Technology
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
We report the fabrication of small (Ba,A)Fe2As2 (A: Na, K) coils using 10 m-class long round wires, fabricated by powder-in-tube (PIT) method. Coils are sintered using hot-isostatic-press (HIP) technique after glass-fiber insulations are installed. Critical current (Ic) of the whole coil using (Ba,Na)Fe2As2 and (Ba,K)Fe2As2 are 60 A and 66 A under the self-field, and the generated magnetic fields at the center of the coil reach 2.6 kOe and 2.5 kOe, respectively. Furthermore, the largest transport critical current density (Jc) and Ic in (Ba,Na)Fe2As2 wires picked up from the coil reach 54 kAcm-2 and 51.8 A at T = 4.2 K under a magnetic field of 100 kOe, respectively. This value exceeds transport Jc of all previous iron-based superconducting round wires. Texturing of grains in the core of the wire due to the improvement of the wire drawing process plays a key role for the enhancement of Jc.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| (Ba,Na)Fe2As2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | — | Pressure not reported | unknown |
| (Ba,K)Fe2As2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | — | Pressure not reported | unknown |
Similar papers
Enhancement of critical current density in (Ba,Na)Fe2As2 round wires using high-pressure sintering
similarity 0.95Sunseng Pyon et al. · 2020 · arXiv:2004.10423
Source status unknown — claims are unverified
Achievement of practical level critical current densities in PIT Ba1-xKxFe2As2/Ag tapes by conventional cold mechanical deformation
similarity 0.92Zhaoshun Gao et al. · 2013 · arXiv:1310.4623
Source status unknown — claims are unverified
Enhancement of Critical Current Densities in (Ba,K)Fe2As2 by 320 MeV Au Irradiation in Single Crystals and by High-Pressure Sintering in PIT Wires
similarity 0.92Sunseng Pyon et al. · 2013 · arXiv:1311.6213
Source status unknown — claims are unverified
Enhancement of critical current densities in (Ba,K)Fe2As2 wires and tapes using HIP technique
similarity 0.92Sunseng Pyon et al. · 2016 · arXiv:1609.09198
Source status unknown — claims are unverified
High critical current density and low anisotropy in textured Sr1-xKxFe2As2 tapes for high field applications
similarity 0.91Zhaoshun Gao et al. · 2013 · arXiv:1302.4583
Source status unknown — claims are unverified
Enhanced high-field transport critical current densities observed for the ex-situ PIT processed Ag/(Ba,K)Fe2As2 thin tapes
similarity 0.91K. Togano et al. · 2013 · arXiv:1302.0482
Source status unknown — claims are unverified