High Density Fabrication Process for Single Flux Quantum Circuits
D. Yohannes, M. Renzullo, J. Vivalda, A. C. Jacobs, M. Yu, J. Walter, A. F. Kirichenko, I. V. Vernik, O. A. Mukhanov
arXiv:2305.07607 · DOI 10.1063/5.0152552 · 2023-05-12 · Applied Physics Letters
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
We implemented, optimized and fully tested over multiple runs a superconducting Josephson junction fabrication process tailored for the integrated digital circuits that are used for control and readout of superconducting qubits operating at millikelvin temperatures. This process was optimized for highly energy efficient single flux quantum (ERSFQ) circuits with the critical currents reduced by factor of ~10 as compared to those operated at 4.2 K. Specifically, it implemented Josephson junctions with 10 uA unit critical current fabricated with a 10 uA/um2 critical current density. In order to circumvent the substantial size increase of the SFQ circuit inductors, we employed a NbN high kinetic inductance layer (HKIL) with a 8.5 pH/sq sheet inductance. Similarly, to maintain the small size of junction resistive shunts, we used a non-superconducting PdAu alloy with a 4.0 ohm/sq sheet resistance. For integration with quantum circuits in a multi-chip module, 5 and 10 um height bump processes were also optimized. To keep the fabrication process in check, we developed and thoroughly tested a comprehensive Process Control Monitor chip set.
Similar papers
Advanced Fabrication Processes for Superconducting Very Large Scale Integrated Circuits
similarity 0.91Sergey K. Tolpygo et al. · 2015 · arXiv:1509.05081
Source status unknown — claims are unverified
Development of Multi-Layer Fabrication Process for SFQ Large Scale Integrated Digital Circuits
similarity 0.90Liliang Ying et al. · 2020 · arXiv:2011.06272
Source status unknown — claims are unverified
Developments Toward a 250-nm, Fully Planarized Fabrication Process With Ten Superconducting Layers And Self-Shunted Josephson Junctions
similarity 0.89Sergey K. Tolpygo et al. · 2017 · arXiv:1704.07683
Source status unknown — claims are unverified
Single Flux Quantum Circuit Operation at Millikelvin Temperatures
similarity 0.87Jason Walter et al. · 2025 · arXiv:2512.06895
Source status unknown — claims are unverified
Fabrication of high quality ferromagnetic Josephson junctions
similarity 0.86M. Weides et al. · 2005 · arXiv:cond-mat/0511546
Source status unknown — claims are unverified
Fabrication of low-loss Josephson parametric devices
similarity 0.85K. E. Honasoge et al. · 2024 · arXiv:2412.11280
Source status unknown — claims are unverified