Effect of SiC-Impurity Layer and Growth Temperature on MgB2 Superconducting Tapes Fabricated by HPCVD
Mahipal Ranot, Won Kyung Seong, Soon-Gil Jung, Won Nam Kang, J Joo, C-J Kim, B-H Jun, S. Oh
arXiv:1112.1908 · DOI 10.1002/CVDE.201106935 · 2011-12-08 · arXiv: Superconductivity
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
The influence of SiC-impurity layer and growth temperature on microstructure and superconducting properties were studied for MgB2 superconducting tapes. The pulsed laser deposition (PLD) system was used for the deposition of amorphous SiC-impurity layers on the flexible metallic Cu (001) tapes. The MgB2 superconducting tapes were fabricated by growing MgB2 films on the top of SiC/Cu tapes over a wide temperature range of 460 - 600 °C by using hybrid physical-chemical vapor deposition (HPCVD) system. Among all tapes, the MgB2/SiC/Cu tape deposited at a temperature of 540 °C has the highest Tc of ~ 37.7 K. Scanning electron microscopy (SEM) images revealed the hexagonal shaped MgB2 grains with good connectivity, and their sizes were found to vary with growth temperatures. As compared to MgB2/Cu tapes, the MgB2/SiC/Cu tapes exhibited opposite trend in the dependence of critical current density (Jc) with deposition temperatures. The improved Jc (H) behavior could be explained on the basis of the enhanced flux pinning force density (Fp) for MgB2/SiC/Cu tapes upon increasing growth temperature.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| MgB2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 37.7 | Pressure not reported | unknown |
Similar papers
MgB2 coated superconducting tapes with high critical current densities fabricated by hybrid physical-chemical vapor deposition
similarity 0.94Mahipal Ranot & W. N. Kang · 2011 · arXiv:1112.1911
Source status unknown — claims are unverified
Superconducting performance of ex-situ SiC-doped MgB2 mono-filamentary tapes
similarity 0.93Gennaro Romano et al. · 2014 · arXiv:1405.4124
Source status unknown — claims are unverified
Enhancement of the critical current density and flux pinning of MgB2 superconductor by nanoparticle SiC doping
similarity 0.90S. X. Dou et al. · 2002 · arXiv:cond-mat/0207223
Source status unknown — claims are unverified
MgB2 thick film with TC = 40.2 K deposited on sapphire substrate
similarity 0.90Kaicheng Zhang et al. · 2006 · arXiv:cond-mat/0606564
Source status unknown — claims are unverified
Effect of synthesis temperature on superconducting properties of n-SiC added bulk MgB2 superconductor
similarity 0.90Arpita Vajpayee et al. · 2011 · arXiv:1101.5206
Source status unknown — claims are unverified
Probe to properties of MgB2 thick film on silicon carbide substrate
similarity 0.90Fen Li et al. · 2006 · arXiv:cond-mat/0608549
Source status unknown — claims are unverified