Performance of Titanium-Oxide/Polymer Insulation in Bi-2212/Ag-alloy Round Wire Wound Superconducting Coils
Peng Chen, Ulf P Trociewitz, Matthieu Dalban-Canassy, Jianyi Jiang, Eric E Hellstrom, David C Larbalestier
arXiv:1303.4810 · 2013-03-20 · arXiv: Superconductivity
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
Conductor insulation is one of the key components needed to make Ag-alloy clad Bi2Sr2CaCu2O8+x (Bi-2212/Ag) superconducting round wire (RW) successful for high field magnet applications as dielectric standoff and high winding current densities (Jw) directly depend on it. In this study, a TiO2/polymer insulation coating developed by nGimat LLC was applied to test samples and a high field test coil. The insulation was investigated by differential thermal analysis (DTA), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), dielectric properties measurement, and transport critical current (Ic) properties measurement. About 29% of the insulation by weight is polymer. When the Bi-2212/Ag wire is full heat treated, this decomposes with slow heating to 400°C in pure O2. After the full reaction, we found that the TiO2 did not degrade the critical current properties, adhered well to the conductor, and provided a breakdown voltage of >100 V, which allowed the test coil to survive quenching in 31.2 T background field, while providing a 2.6 T field increment. For Bi-2212/Ag RW with a typical diameter of 1.0-1.5 mm, this ~15 um thick insulation allows a very high coil packing factor of ~0.74, whereas earlier alumino-silicate braid insulation only allows packing factors of 0.38-0.48.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| Bi2Sr2CaCu2O8+x Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | — | Pressure not reported | — |
Similar papers
A transformative superconducting magnet technology for fields well above 30 T using isotropic round wire multifilament Bi2Sr2CaCu2O8-x conductor
similarity 0.85D. C. Larbalestier et al. · 2013 · arXiv:1305.1269
Source status unknown — claims are unverified
Stable, predictable and training-free operation of superconducting Bi-2212 Rutherford cable racetrack coils at the very high wire current density of more than 1000 A/mm2
similarity 0.85Tengming Shen et al. · 2018 · arXiv:1808.02864
Source status unknown — claims are unverified
Role of internal gases and creep of Ag in controlling the critical current density of Ag-sheathed Bi2Sr2CaCu2Ox wires
similarity 0.83T. Shen et al. · 2013 · arXiv:1301.5341
Source status unknown — claims are unverified
Reduction of gas bubbles and improved critical current density in Bi-2212 round wire by swaging
similarity 0.83Jianyi Jiang et al. · 2013 · arXiv:1301.3401
Source status unknown — claims are unverified
The Conundrum of Strongly Coupled Supercurrent Flow in Both Under- and Over-doped Bi-2212 Round Wires
similarity 0.83Yavuz Oz et al. · 2021 · arXiv:2101.02292
Source status unknown — claims are unverified
Critical Current Distributions of Recent Bi-2212 Round Wires
similarity 0.82Shaon Barua et al. · 2021 · arXiv:2102.11460
Source status unknown — claims are unverified