Optimization of infrared and magnetic shielding of superconducting TiN and Al coplanar microwave resonators
John Mark Kreikebaum, Allison Dove, William Livingston, Eunseong Kim, Irfan Siddiqi
arXiv:1608.06273 · DOI 10.1088/0953-2048/29/10/104002 · 2016-08-22 · Superconductor Science and Technology
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
We present a systematic study of the effects of shielding on the internal quality factors (Qi) of Al and TiN microwave resonators designed for use in quantum coherent circuits. Measurements were performed in an adiabatic demagnetization refrigerator, where typical magnetic fields of 200 μT are present at the unshielded sample stage. Radiation shielding consisted of 100 mK and 500 mK Cu cans coated with infrared absorbing epoxy. Magnetic shields consisted of Cryoperm 10 and Sn plating of the Cu cans. A 2.7 K radiation can and coaxial thermalization filters were present in all measurements. TiN samples with Qi = $1.3*10^6$ at 100 mK exhibited no significant variation in quality factor when tested with limited shielding. In contrast, Al resonators showed improved Qi with successive shielding, with the largest gains obtained from the addition of the first radiation and magnetic shields and saturating before the addition of Sn plating infrared absorbing epoxy.
Similar papers
Identifying capacitive and inductive loss in lumped element superconducting hybrid titanium nitride/aluminum resonators
similarity 0.87Michael R. Vissers et al. · 2012 · arXiv:1203.5112
Source status unknown — claims are unverified
Superconducting Cavity Electromechanics on a Silicon-on-Insulator Platform
similarity 0.87Paul B. Dieterle et al.
Source status unknown — claims are unverified
Minimal resonator loss for circuit quantum electrodynamics
similarity 0.86R. Barends et al. · 2010 · arXiv:1005.0408
Source status unknown — claims are unverified
In situ AlO passivation of epitaxial tantalum and aluminum films enables long-term stability in superconducting microwave resonators
similarity 0.86Yi-Ting Cheng et al. · 2025 · arXiv:2508.01232
Source status unknown — claims are unverified
Copper waveguide cavities with reduced surface loss for coupling to superconducting qubits
similarity 0.86Daniela F. Bogorin et al. · 2014 · arXiv:1409.3245
Source status unknown — claims are unverified
Highly crystalline superconducting TiN resonators grown on thermally reconstructed sapphire
similarity 0.86Thomas J. Smart et al. · 2026 · arXiv:2606.20317
Source status unknown — claims are unverified