Characterization of NbTiN films with thicknesses below 20 nm for low power kinetic inductance amplifiers

A. Giachero; M. R. Vissers; J. D. Wheeler; M. Malnou; J. E. Austermann; J. Hubmayr; A. Nucciotti; J. N. Ullom; J. Gao

doi:10.1109/TASC.2023.3253069

← Back to search

Characterization of NbTiN films with thicknesses below 20 nm for low power kinetic inductance amplifiers

A. Giachero, M. R. Vissers, J. D. Wheeler, M. Malnou, J. E. Austermann, J. Hubmayr, A. Nucciotti, J. N. Ullom, J. Gao

arXiv:2402.11720 · DOI 10.1109/TASC.2023.3253069 · 2024-02-18 · IEEE Transactions on Applied Superconductivity

T1theoretical4 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

A quantum-limited amplification chain is a fundamental advantage for any application that may benefit from the detection of very faint signals. Reading out arrays of superconducting detectors (TESs or MKIDs), resonant cavities, or qubits, calls for large bandwidth amplifiers in addition to having the lowest possible noise. At millikelvin temperatures, Kinetic Inductance Traveling-Wave Parametric Amplifiers (KI-TWPAs) working in 3-wave-mixing (3WM) and fabricated from a 20 nm thick NbTiN film have shown promising noise performances, as they can operate close to the quantum limit. However, they still require fairly high pump power. Devices that would require lower pump power would be easier to implement in readout chains, could reach the quantum limit and they would be compatible with qubit readout. A possible solution for obtaining this optimal configuration is to use a thinner superconducting film. In this work we explore the properties of NbTiN films with a thickness less than 20 nm and we report the obtained experimental characterizations in terms of critical temperature, normal resistivity, and kinetic inductance. A new design for a 3WM KI-TWPA amplifier, based on these developed superconducting films, is introduced and discussed.

Source-reported materials — not catalogue approval

Formula	Reported Tc (K)	Pressure (GPa)	Type
NbTiN Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula.	—	Pressure not reported	unknown
NbTiN Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula.	—	Pressure not reported	unknown
NbTiN Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula.	—	Pressure not reported	unknown