Study of Ag and Cu / MgB2 powder-in-tube composite wires fabricated by in-situ reaction at low temperature
E. Martinez, L. A. Angurel, R. Navarro
arXiv:cond-mat/0203464 · DOI 10.1088/0953-2048/15/7/309 · 2002-03-22 · Superconductor Science and Technology
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
Superconducting Ag or Cu sheathed MgB2 wires have been fabricated by conventional powder-in-tube techniques. The in-situ reaction of Mg and B powders with atomic proportions of 1:2 and 1.33:2 inside Ag or Cu tubes at low temperatures have been searched. An active alloying of Mg with Ag or Cu sheaths at temperatures below 660 C has been observed. For Ag sheaths, there is a strong diffusion of Mg, which does not allow the formation of large amounts of MgB2 at the core. For Cu sheaths, the diffusion of Mg is stopped by the formation of a MgCu2 layer around the superconducting core and an appropriated excess of Mg leads to superconducting cores with Tc=39 K and good Jc values, thus being possible the development of Cu/MgB2 composite wires.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| MgB2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 39 | Pressure not reported | unknown |
Similar papers
Possibilities of MgB2/Cu Wires Fabricated by the in-situ Reaction Technique
similarity 0.94E. Martinez & R. Navarro · 2003 · arXiv:cond-mat/0306090
Source status unknown — claims are unverified
Improvement of critical current density in the Cu/MgB2 and Ag/MgB2 superconducting wires using the fast formation method
similarity 0.93S. Soltanian et al. · 2002 · arXiv:cond-mat/0201261
Source status unknown — claims are unverified
Superconducting properties of the powder-in-tube Cu-Mg-B and Ag-Mg-B wires
similarity 0.91B. A. Glowacki et al. · 2001 · arXiv:cond-mat/0109085
Source status unknown — claims are unverified
Influence of the Preparation Process on Microstructure, Critical Current Density and Tc of MgB2 Powder-In-Tube Wires
similarity 0.91S. I. Schlachter et al. · 2002 · arXiv:cond-mat/0210591
Source status unknown — claims are unverified
High performance new MgB2 superconducting hollow wires
similarity 0.90G. Giunchi et al. · 2002 · arXiv:cond-mat/0207488
Source status unknown — claims are unverified
Properties of superconducting MgB_2 wires: "in-situ" versus "ex-situ" reaction technique
similarity 0.90Alexey V Pan et al. · 2003 · arXiv:cond-mat/0302249
Source status unknown — claims are unverified