Possibilities of MgB2/Cu Wires Fabricated by the in-situ Reaction Technique
E. Martinez, R. Navarro
arXiv:cond-mat/0306090 · 2003-06-04 · arXiv: Superconductivity
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
The superconducting properties of copper-sheathed MgB2 wires fabricated by conventional powder-in-tube techniques and the in-situ reaction procedure are analysed. The influence of the processing conditions and initial (1+x)Mg + 2B (x = 0, 0.1, 0.2) proportions of the precursors on the critical current values of the wires have been studied. In particular, the limits of the available temperatures and times for heat treatments imposed by the chemical reaction between Mg and Cu, and their effect on the superconducting properties of the wires, are discussed. The analysis includes the study of the sample microstructure and phase composition as well as of the critical current temperature and field dependences. The wires show high thermal stability during direct transport measurements and carry a critical current density of 1.3x109 A/m2 at 15 K in the self-field for optimised processing conditions.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| MgB2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | — | Pressure not reported | — |
Similar papers
Influence of the Preparation Process on Microstructure, Critical Current Density and Tc of MgB2 Powder-In-Tube Wires
similarity 0.94S. I. Schlachter et al. · 2002 · arXiv:cond-mat/0210591
Source status unknown — claims are unverified
Properties of superconducting MgB_2 wires: "in-situ" versus "ex-situ" reaction technique
similarity 0.90Alexey V Pan et al. · 2003 · arXiv:cond-mat/0302249
Source status unknown — claims are unverified
Influence of Preparation Process on Microstructure, Critical Current Density and Tc of MgB2/Fe/Cu Wires
similarity 0.90Y. F. Wu et al. · 2006 · arXiv:cond-mat/0607223
Source status unknown — claims are unverified
High performance new MgB2 superconducting hollow wires
similarity 0.90G. Giunchi et al. · 2002 · arXiv:cond-mat/0207488
Source status unknown — claims are unverified
High transport currents in mechanically reinforced MgB2 wires
similarity 0.90W. Goldacker et al. · 2001 · arXiv:cond-mat/0106226
Source status unknown — claims are unverified
High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes
similarity 0.89H. Kumakura et al. · 2001 · arXiv:cond-mat/0106002
Source status unknown — claims are unverified