← Back to search

RF Surface Resistance of a HIPped MgB2 Sample at 21 GHz

T. Tajima, F. L. Krawczyk, J. Liu, D. C. Nguyen, D. L. Schrage, A. Serquis, A. H. Shapiro, V. F. Nesterenko, Y. Gu

arXiv:cond-mat/0310213 · 2003-10-09 · arXiv: Superconductivity

T1theoretical1 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

Magnesium diboride (MgB2) is attractive for RF cavity application for particle accelerators because it might not show an increase of RF surface losses at high magnetic surface fields, a phenomenon that has prevented high-Tc superconducting materials such as YBCO from being used for this application. We have measured the RF surface resistance (Rs) at 21 GHz of a MgB2 sample fabricated using Hot Isostatic Press (HIP) at 200 MPa and 1000 C. The results show that polishing with 0.1-micron diamond lapping film followed by a 1500-psi DI water rinse in a clean room reduced the Rs by a factor of 6.2 at 15 K and it is the lowest compared to other published data. The Rs data near the lowest temperature (~13 K) scatter between 0.6 and 1.3 mOhm. The penetration depth and energy gap were estimated to be 263 nm and 1.9-2.7, respectively, for the polished surface.

Source-reported materials — not catalogue approval

FormulaReported Tc (K)Pressure (GPa)Type
MgB2

Archive — visibility unverified

Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula.

—0.2 GPaunknown

Similar papers