Effects of Ion Milling on the Microwave Properties of MgB2 Films
Sang Young Lee, J. H. Lee, J. Lim, H. N. Lee, S. H. Moon, B. Oh, M. A. Hein
arXiv:cond-mat/0208304 · DOI 10.1109/TASC.2003.812404 · 2002-08-15 · IEEE Transactions on Applied Superconductivity
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
The new superconductor MgB2 may prove useful for microwave applications at intermediate temperatures. MgB2 films with the thickness of 300 - 400 nm have surface resistance Rs less than 0.01 mOhms at a frequency (f) of 8.5 GHz and 7 K,and ~ 1.5 mOhms at 87 GHz and 4.2 K. The critical temperature (Tc) of these films is ~ 39 K when they are prepared under optimum conditions. The Rs appears to scale as f^2 up to 30 K. After surface ion-milling, a reduction of the Tc and an enhanced resistivity rho(Tc) are observed consistently at 8.5 GHz and 87 GHz along with a reduced Rs at low temperatures. The observed rho(Tc) - Tc relation and the uncorrelated behavior between rho(Tc) and Rs values measured at low temperatures are well explained in terms of the two-gap model, with the observed rho(Tc) - Tc relation attributed to the properties of the large gap, and the Rs at lower temperatures reflecting the properties of the small gap, with an enhanced small gap energy due to increased interband scattering. This study suggests that the interband scattering should be enhanced to improve the low temperature microwave properties of MgB2 films and that the ion-milling process must be performed with great care to preserve the high quality of MgB2 films.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| MgB2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 39 | Pressure not reported | unknown |
Similar papers
Significant Reduction of the Microwave Surface Resistance of MgB2 Films by Surface Ion Milling
similarity 0.94Sang Young Lee et al. · 2001 · arXiv:cond-mat/0105327
Source status unknown — claims are unverified
Study of the microwave electrodynamic response of MgB2 thin films
similarity 0.92A. Andreone et al. · 2001 · arXiv:cond-mat/0109465
Source status unknown — claims are unverified
Effects of the Two- Gap Nature on the Microwave Conductivity of 39 K Polycrystalline MgB2 Films
similarity 0.92Sang Young Lee et al. · 2004 · arXiv:cond-mat/0403665
Source status unknown — claims are unverified
Electrical and structural properties of MgB2 films prepared by sequential deposition of B and Mg on the NbN buffered Si(100) substrate
similarity 0.91S. Chromik et al. · 2004 · arXiv:cond-mat/0401569
Source status unknown — claims are unverified
Superconducting MgB2 thin films nano-bridges for cryo-electronic application
similarity 0.90M. Gregor et al. · 2007 · arXiv:0705.4229
Source status unknown — claims are unverified
Superconducting properties of MgB2 thin films prepared on flexible plastic substrates
similarity 0.90P. Kus et al. · 2002 · arXiv:cond-mat/0206442
Source status unknown — claims are unverified