A new method for direct rf power absorption studies in CMR materials and high T_c superconductors

S. Sarangi; S. V. Bhat

doi:10.1063/1.1841851

← Back to search

A new method for direct rf power absorption studies in CMR materials and high T_c superconductors

S. Sarangi, S. V. Bhat

arXiv:cond-mat/0503542 · DOI 10.1063/1.1841851 · 2005-03-22 · arXiv: Superconductivity

T1theoretical1 citations

Active bibliographic source — not scientific approval

Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.

Abstract

The design, fabrication and performance of an apparatus for the measurement of direct rf power absorption in colossal magnetoresistive (CMR) and superconducting samples are described. The system consists of a self-resonant LC tank circuit of an oscillator driven by a NOT logic gate. The samples under investigation are placed in the core of the coil forming the inductance L and the absorbed power is determined from the measured change in the current supplied to the oscillator circuit. A customized low temperature insert is used to integrate the experiment with a commercial Oxford Instruments cryostat and temperature controller. The oscillator working in the rf range between 1 MHz to 25 MHz is built around an IC 74LS04. The temperature can be varied from 4.2 to 400 K and the magnetic field from 0 to 1.4 T. The apparatus is capable of measuring direct power absorption in CMR and superconducting samples of volume as small as 1/1000 cm^3 with a signal to noise ratio of 10:1. Further increase in the sensitivity can be obtained by summing the results of repeated measurements obtained at a given temperature. The system performance is evaluated by measuring the absorbed power in La_0.7 Sr_0.3 MnO_3 (LSMO) CMR manganite samples and superconducting Y Ba_2 Cu_3 O_7 (YBCO) samples at different rf frequencies. All operations during the measurements are automated using a computer with a menu-driven software system, user input being required only for the initiation of the measurement sequence.

Source-reported materials — not catalogue approval

Formula	Reported Tc (K)	Pressure (GPa)	Type
YBa2Cu3O7 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula.	—	Pressure not reported	unknown