Strain Effect in MgB2/Stainless Steel Superconducting Tape
H. Kitaguchi, H. Kumakura, K. Togano
arXiv:cond-mat/0106388 · DOI 10.1016/S0921-4534(01)00960-1 · 2001-06-19 · Physica C-superconductivity and Its Applications
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
The influence of mechanical strain on the critical current (Ic) is investigated for MgB2/stainless steel (SUS316) superconducting tapes. The tapes are fabricated by using 'powder in tube' method and deformation process without any heat treatment. The tensile axial strain along tape length is successfully induced to the sample by using a U-shape holder made of stainless steel (SUS304). Two samples are examined at 4.2 K in 5 T (B is applied perpendicular to the tape surface). While the initial Ic at zero external strain state (Ic0) varies (30.4 and 33.3 A), normalized Ic (Ic/Ic0) vs. external strain relations fall on the same curve. Linear increase of Ic is observed from zero external strain state to 0.5% strain (107% of Ic0). Rapid and large degradation occurs at the strain exceeding 0.4-0.5%. High durability against stress can be expected for MgB2/stainless steel superconducting tapes.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| MgB2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | — | Pressure not reported | unknown |
Similar papers
Mechanically reinforced MgB2 wires and tapes with high transport currents
similarity 0.91R. Nast et al. · 2001 · arXiv:cond-mat/0108458
Source status unknown — claims are unverified
High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes
similarity 0.88H. Kumakura et al. · 2001 · arXiv:cond-mat/0106002
Source status unknown — claims are unverified
Thermal strain-induced enhancement of electromagnetic properties in SiC-MgB2 composites
similarity 0.88R. Zeng S. X. Dou et al. · 2008 · arXiv:0808.1136
Source status unknown — claims are unverified
Preparation of 18-filament Cu/NbZr/MgB2 tape with high transport critical current density
similarity 0.87C. F. Liu et al. · 2001 · arXiv:cond-mat/0106061
Source status unknown — claims are unverified
Fabrication and transport critical currents of multifilamentary MgB2/Fe wires and tapes
similarity 0.87H. L. Suo et al. · 2002 · arXiv:cond-mat/0203114
Source status unknown — claims are unverified
MgB2 coated superconducting tapes with high critical current densities fabricated by hybrid physical-chemical vapor deposition
similarity 0.87Mahipal Ranot & W. N. Kang · 2011 · arXiv:1112.1911
Source status unknown — claims are unverified