Mechanical properties of reinforced MgB2 wires
Wilfried Goldacker, Sonja I. Schlachter, Johann Reiner, Silke Zimmer, Arman Nyilas, Helmut Kiesel
arXiv:cond-mat/0211617 · DOI 10.1109/TASC.2003.812218 · 2002-11-27 · IEEE Transactions on Applied Superconductivity
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
For technical application in windings of coils, transformers or motors, a reinforcement of MgB2 wires and tapes is necessary to withstand applied stresses and strains and to avoid cracks in the filaments. Therefore, the response of the superconducting transport currents on applied axial strain in different magnetic background fields was investigated for differently stainless steel reinforced MgB2 wires, by means of an axial strain rig. Increased amounts of stainless steel in the sheath caused a stronger decrease of the critical currents in fields above 3 T as a consequence of a changed irreversibility field. Heat treated wires have a quite different mechanical behaviour compared to as-cold-worked wires, but an about 10 times higher transport current level. Tape geometries, having generally higher current carrying capabilities than wires, showed much poorer mechanical properties with a less effective filament precompression from the matrix.
Similar papers
Mechanically reinforced MgB2 wires and tapes with high transport currents
similarity 0.96R. Nast et al. · 2001 · arXiv:cond-mat/0108458
Source status unknown — claims are unverified
Influence of mechanical reinforcement of MgB2 wires on the superconducting properties
similarity 0.95W. Goldacker & S. I. Schlachter · 2001 · arXiv:cond-mat/0110231
Source status unknown — claims are unverified
Mechanically Reinforced MgB2 Wires and Tapes with High Transport Currents
similarity 0.91W. Goldacker et al. · 2002 · arXiv:cond-mat/0204599
Source status unknown — claims are unverified
High transport currents in mechanically reinforced MgB2 wires
similarity 0.91W. Goldacker et al. · 2001 · arXiv:cond-mat/0106226
Source status unknown — claims are unverified
Strain Effect in MgB2/Stainless Steel Superconducting Tape
similarity 0.89H. Kitaguchi et al. · 2001 · arXiv:cond-mat/0106388
Source status unknown — claims are unverified
Influence of the Preparation Process on Microstructure, Critical Current Density and Tc of MgB2 Powder-In-Tube Wires
similarity 0.89S. I. Schlachter et al. · 2002 · arXiv:cond-mat/0210591
Source status unknown — claims are unverified