Comparative study of in situ and ex situ MgB2 films deposited by pulsed laser deposition
Y. Zhao, M. Ionescu, J. Horvat, S. X. Dou
arXiv:cond-mat/0311556 · DOI 10.1088/0953-2048/17/9/004 · 2003-11-25 · Superconductor Science and Technology
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
Two types of MgB2 films were prepared by pulsed laser deposition (PLD) with in situ and ex situ annealing processes respectively. Significant differences in properties between the two types of films were found. The ex situ MgB2 film has a Tc of 38.1K, while the in situ film has a depressed Tc of 34.5K. The resistivity at 40K for the in situ film is larger than that of the ex situ film by a factor of 6. The residual resistivity ratios (RRR) are 1.1 and 2.1 for the in situ and ex situ films respectively. The Jc-H curves of the in situ film show a much weaker field dependence than those of the ex situ film, attributable to stronger flux pinning in the in situ film. The small-grain feature and high oxygen level may be critical for the significant improvement of Jc in the in situ annealed MgB2 film.
Source-reported materials — not catalogue approval
| Formula | Reported Tc (K) | Pressure (GPa) | Type |
|---|---|---|---|
| MgB2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 38.1 | Pressure not reported | unknown |
| MgB2 Archive — visibility unverified Source-occurrence policy only; no material identity or catalogue acceptance is inferred from the formula. | 34.5 | Pressure not reported | unknown |
Similar papers
Superconducting MgB2 thin films by pulsed laser deposition
similarity 0.91S. R. Shinde et al. · 2001 · arXiv:cond-mat/0103542
Source status unknown — claims are unverified
Superconducting properties of nanocrystalline MgB thin films made by an in situ annealing process
similarity 0.91X. H. Zeng et al. · 2001 · arXiv:cond-mat/0105080
Source status unknown — claims are unverified
Thickness dependence of the properties of epitaxial MgB2 thin films grown by hybrid physical-chemical vapor deposition
similarity 0.88A. V. Pogrebnyakov et al. · 2003 · arXiv:cond-mat/0304164
Source status unknown — claims are unverified
Superconducting Mg-B films by pulsed laser deposition in an in-situ two-step process using multi-component targets
similarity 0.88D. H. A. Blank et al. · 2001 · arXiv:cond-mat/0103543
Source status unknown — claims are unverified
Properties of MgB2 Films Grown at Various Temperatures by Hybrid Physical-Chemical Vapour Deposition
similarity 0.87K. Chen et al. · 2011 · arXiv:1112.4044
Source status unknown — claims are unverified
Multi transitions in MgB2 films prepared by pulsed laser deposition
similarity 0.86Yi Zhao et al. · 2004 · arXiv:cond-mat/0412776
Source status unknown — claims are unverified