Towards the Realization of Higher Connectivity in MgB2 Conductors: In-situ or Sintered Ex-situ?
A. Yamamoto, H. Tanaka, J. Shimoyama, H. Ogino, K. Kishio, T. Matsushita
arXiv:1111.6767 · DOI 10.1143/JJAP.51.010105 · 2011-11-29 · Japanese Journal of Applied Physics
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
The two most common types of MgB2 conductor fabrication technique - in-situ and ex-situ - show increasing conflicts concerning the connectivity, an effective current-carrying cross-sectional area. An in-situ reaction yields a strong intergrain coupling with a low packing factor, while an ex-situ process using pre-reacted MgB2 yields tightly packed grains, however, their coupling is much weaker. We studied the normal-state resistivity and microstructure of ex-situ MgB2 bulks synthesized with varied heating conditions under ambient pressure. The samples heated at moderately high temperatures of ~900°C for a long period showed an increased packing factor, a larger intergrain contact area and a significantly decreased resistivity, all of which indicate the solid-state self-sintering of MgB2. Consequently the connectivity of the sintered ex-situ samples exceeded the typical connectivity range 5-15% of the in-situ samples. Our results show self-sintering develops the superior connectivity potential of ex-situ MgB2, though its intergrain coupling is not yet fulfilled, to provide a strong possibility of twice or even much higher connectivity in optimally sintered ex-situ MgB2 than in in-situ MgB2.
Similar papers
Strongly connected ex-situ MgB2 polycrystalline bulks fabricated by solid-state self-sintering
similarity 0.94Hiroya Tanaka et al. · 2012 · arXiv:1209.4689
Source status unknown — claims are unverified
Influence of the Preparation Process on Microstructure, Critical Current Density and Tc of MgB2 Powder-In-Tube Wires
similarity 0.89S. I. Schlachter et al. · 2002 · arXiv:cond-mat/0210591
Source status unknown — claims are unverified
Properties of superconducting MgB_2 wires: "in-situ" versus "ex-situ" reaction technique
similarity 0.89Alexey V Pan et al. · 2003 · arXiv:cond-mat/0302249
Source status unknown — claims are unverified
Possibilities of MgB2/Cu Wires Fabricated by the in-situ Reaction Technique
similarity 0.87E. Martinez & R. Navarro · 2003 · arXiv:cond-mat/0306090
Source status unknown — claims are unverified
Very fast formation of superconducting MgB2/Fe wires with high Jc
similarity 0.87X. L. Wang et al. · 2001 · arXiv:cond-mat/0106148
Source status unknown — claims are unverified
Improvement of critical current density in the Cu/MgB2 and Ag/MgB2 superconducting wires using the fast formation method
similarity 0.87S. Soltanian et al. · 2002 · arXiv:cond-mat/0201261
Source status unknown — claims are unverified