Strongly connected ex-situ MgB2 polycrystalline bulks fabricated by solid-state self-sintering
Hiroya Tanaka, Akiyasu Yamamoto, Jun-ichi Shimoyama, Hiraku Ogino, Kohji Kishio
arXiv:1209.4689 · DOI 10.1088/0953-2048/25/11/115022 · 2012-09-21 · Superconductor Science and Technology
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
We have investigated the microstructure, normal-state electrical connectivity, and critical current density of ex-situ MgB2 polycrystalline bulks prepared by systematically varying the sintering conditions under low pressure. Samples heated at a high temperature of ~900°C for a long period showed an increased packing factor, a larger intergrain contact area, and a significantly enhanced electrical connectivity, all of which indicate solid-state self-sintering of MgB2. Sintered ex-situ MgB2 bulks from a laboratory-made ball-milled powder exhibited a greatly enhanced connectivity of 28%, which is the highest connectivity of pressureless ex-situ MgB2 bulks, wires, and tapes. Surprisingly, grain growth did not occur during long-duration (~100 h) sintering in the sintered ex-situ MgB2 bulks. This is in marked contrast to in-situ processed MgB2 samples for which significant grain growth occurred during heat treatment at ~900°C, producing grains that are several tens of times larger than the initial boron grains. Consequently, the critical current density as a function of the external magnetic field at 20 K progressively improved with sintering due to the relatively small grain size and good intergrain connectivity. We thus conclude that solid-state self-sintering is an effective approach for producing strongly connected, dense ex-situ MgB2 polycrystals without grain growth.
Similar papers
Towards the Realization of Higher Connectivity in MgB2 Conductors: In-situ or Sintered Ex-situ?
similarity 0.94A. Yamamoto et al. · 2011 · arXiv:1111.6767
Source status unknown — claims are unverified
Effect of sintering temperature under high pressure in the uperconductivity for MgB2
similarity 0.89C. U. Jung et al. · 2001 · arXiv:cond-mat/0102383
Source status unknown — claims are unverified
Very fast formation of superconducting MgB2/Fe wires with high Jc
similarity 0.88X. L. Wang et al. · 2001 · arXiv:cond-mat/0106148
Source status unknown — claims are unverified
Comparative Study of Dense Bulk MgB Materials Prepared by Different Methods
similarity 0.88V. N. Narozhnyi et al. · 2002 · arXiv:cond-mat/0206513
Source status unknown — claims are unverified
Effect of nanometer-sized B powder on phase formation of polycrystalline MgB2
similarity 0.88Ling An et al. · 2004 · arXiv:cond-mat/0410533
Source status unknown — claims are unverified
Connectivity and Critical Currents in Polycrystalline MgB2
similarity 0.88M. Eisterer et al. · 2008 · arXiv:0811.0986
Source status unknown — claims are unverified