Exploring the feasibility of Fe(Se,Te) conductors by ex-situ Powder-in-Tube method
M. Palombo, A. Malagoli, M. Pani, C. Bernini, P. Manfrinetti, A. Palenzona, M. Putti
arXiv:1506.01630 · 2015-06-04
Active bibliographic source — not scientific approval
Bibliographic access preserves source history; it does not approve extracted materials or validate reported claims. Review warnings on each occurrence separately.
Abstract
In this work, the feasibility condition of Powder-In-Tube (PIT) processed wires of Fe(Se,Te) superconductor has been investigated. We faced several technical issues that are extensively described and discussed. In particular, we tested different metals and alloys as external sheaths (Cu, Ag, Nb, Ta, Ni, Fe, cupronickel, brass) concluding that the only sheath that does not affect substantially the Fe(Se,Te) phase is Fe. On the other hand, Fe sheath introduces excess iron in the Fe(Se,Te) phase, which affects the superconducting properties; we investigated the effects of the thermal treatments and of the powder composition in order to avoid it. The maximum Jc value obtained in our samples is 4*10^2 A/cm2, comparable to other published values of PIT conductors of the 11 family. We conclude that the fabrication of Fe(Se,Te) wires by PIT method is quite challenging and other approaches should be developed.
Similar papers
Microstructure and transport properties of FeTe0.5Se0.5 superconducting wires fabricated by ex-situ Powder-in-tube process
similarity 0.90T. Ozaki et al. · 2010 · arXiv:1012.1404
Source status unknown — claims are unverified
Large Transport Critical Current Densities of Ag Sheathed (Ba,K)Fe2As2+Ag Superconducting Wires Fabricated by an ex-situ Powder-in-Tube (PIT) Process
similarity 0.89Kazumasa Togano et al. · 2011 · arXiv:1103.1701
Source status unknown — claims are unverified
Fabrication and characterization of iron pnictide wires and bulk materials through the powder-in-tube method
similarity 0.88Yanwei Ma et al. · 2009 · arXiv:0906.3114
Source status unknown — claims are unverified
Development of Powder-in-Tube Processed Iron Pnictide Wires and Tapes
similarity 0.88Yanwei Ma et al. · 2010 · arXiv:1008.1735
Source status unknown — claims are unverified
Fabrication and transport properties of Sr0.6K0.4Fe2As2 multifilamentary superconducting wires
similarity 0.86Chao Yao et al. · 2012 · arXiv:1212.5873
Source status unknown — claims are unverified
Fabrication of small superconducting coils using (Ba,A)Fe2As2 (A: Na, K) round wires with large critical current densities
similarity 0.85Sunseng Pyon et al. · 2021 · arXiv:2106.10612
Source status unknown — claims are unverified